INTRODUCTION
"DS-CWS", is a cold water soluble starch ether and finds its application in various industries e.g. textile, printing, ink, paints etc.
PRODUCT DESCRIPTION
DS-CWS is produced in extremely controlled conditions to get the product of desired specifications, suitable for individual industry. Each batch is tested to ensure it meets the required standards. Extra care is taken in its packing and transportation to ensure that the product is not contaminated during packing/ storage and transportation.
BROAD TECHNICAL
SPECIFICATIONS
Source
: Maize (corn)
Appearance
: white to creamish, odourless, powder.
Moisture
: Less than 14 %.
Size of
granules
: Passes 60 mesh
pH of 2 % aqueous solution : 9
- 11 or as desired by application
Viscosity of 6 - 8 PH
: 35000 - 45000 cps Brookfield, @ 8%
Solubility in cold
water :
soluble
Ignition
temperature
: more than 360 deg. C
Bulk
density
: over 500 kg/m3.
Chloride
: less than 3%
Heavy
metals
: less than 40 ppm
D.S.
: over 0.28
Active
matter
: over 75%
Ash
content
: less than 18%
AVAILABLE PACKAGING
It is available in 25 Kg. ESKP/HDPE lined kraft Bag with heat-sealed inner liner, for easy handling. Special packing can be arranged on request.
HANDLING, STORAGE
& SAMPLING
Please take
following care during handling, storage and sampling :
- Do not use hooks, drag
the bags on truck or any other platform.
- Make sure that unloading labour have clean hands and heads covered with
clean cloth/cap.
- Bags should be stored
on clean platform, kept covered with
clean piece of tarpaulin. Also ensure that storage area is dry,
covered, away from humid conditions, hazardous, explosive and
aromatic chemicals.
- While sampling, please ensure that sampler and sample container are sterilized. In order to avoid contamination, bags should be sealed
immediately after sampling.
- Whenever possible, bags should be exposed to UV light for two hours or more, before use.
|