INTRODUCTION
"DS-HIBURST" is
a modified Starch formulation specially developed for spraying
applications. It is from the house of people having the unrivaled
experience in the field of manufacture and supply of Starch Spray
Systems. There are some special functional groups present to enhance the
desired properties. Its wet end application on the wire part intensifies
following:
- Bursting Strength and other dry strength
properties (except Tear)
- Ply-bond
and stiffness in boards
- Exceptional
retention of fines/fillers
APPLICATION
Its
slurry is sprayed on the wire part of paper machine at dose of 1 - 3%.
BROAD TECHNICAL
SPECIFICATIONS
Basic
source
: Starch powder
Appearance
: Fine, white, odourless, dry powder
Moisture
: Max 12 %.
Size of
granules
: Passes 85 mesh
pH of 10% aqueous solution : 6 - 7
Viscosity of 2% paste at 75 ' C : 32-37 sec. (Redwood no. 1)
Solubility in cold
water
: Almost insoluble (max. 0.8%)
Gel
Temperature
: 66
+ 2 °C
PREPARATION FOR
DESIRED RESULTS
Slurry
of 30 - 50 gpl in is recommended. No
cooking is required. Complete cook out is accomplished in the drying
section of the paper m/c.
AVAILABLE PACKAGING
It
is available in 50 Kg. (or as per request) HDPE bags with inner liner.
HANDLING, STORAGE
& PACKAGING
Please take
following care during handling and storage :
- Do not use hooks, drag
the bags on truck or any other platform.
- Bags should be stored
on platforms, cleaned with hot air blower and kept covered with
clean piece of tarpaulin. Also ensure that storage area is dry,
covered, anyway, from humid and hazardous conditions.
|