INTRODUCTION
"DS-HIPLY" is a modified Starch formulation specially developed for spraying on Multilayer board applications. It is from the house of people having the unrivaled experience in the field of manufacture and supply of Starch Spray Systems and supply of Spray Starch viz. “DS-HIBURST (PREMIUM)” as well as Oxidized starch “OXISTAR-HC”. There are some special functional groups present to enhance the desired properties. Its application on former / mould areas intensifies:
APPLICATION
Its slurry is sprayed at the interface between two plies at dose of 1 - 2%.
BROAD TECHNICAL
SPECIFICATIONS
Basic
source
: Starch powder
Appearance
: Fine, white, odourless, dry powder
Moisture
: Max 12 %.
Size of
granules
: Passes 85 mesh
pH of 10% aqueous solution
: 6 - 7
Brookfield Viscosity of 5 % paste at 90 °C : 200 CPS
Solubility in cold
water
: Almost insoluble (max. 0.8%)
Gel Temperature
: 62 – 66 °C
PREPARATION FOR
DESIRED RESULTS
Slurry of 20 - 30 gpl is recommended. No cooking is required. Complete cook out is accomplished in the drying section of the paper m/c.
AVAILABLE PACKAGING
It is available in 50 Kg. (or as per request) bags with inner liner.
HANDLING, STORAGE
& PACKAGING
Please take
following care during handling and storage :
-
Do not use hooks, drag
the bags on truck or any other platform.
-
Bags should be stored on platforms, cleaned with hot air blower and kept covered with clean piece of tarpaulin. Also ensure that storage area is dry, covered, away from humid and hazardous conditions.
|