New Page 1

Product Technical Information Sheet - SUROCIL

INTRODUCTION

SUROCIL is a synthetic gum for reactive color printing. When mixed with ordinary guar gum, gives more color yield and brilliancy of colors. It is compatible with all types of gum pastes and is stable to mild alkaline and acidic condition usually present in print pastes of different colors.

SUROCIL paste alongwith gum paste enhances better dye transfer properties, which allow pick up of the print paste to be reduced by upto 25 %

Once it is fixed, its reaction of dye on the surface, results in enhanced color yield in effect less print paste is consumed and more effective use is made of the dye. The reduced pick up also results in reducing the thickener film i.e. thinner film of the thickener than normal and it thus form less of barrier to effective dye fixation during steaming or silicate method.

It is from the house having unrivaled experience in the field of manufacturing and supplying One Shot Size Mix SURESIZE and SURESIZE-H as well as other speciality chemicals for Textile Industry.

PREPARATION OF "SUROCIL" PASTE

Take 4 to 5 Kgs. SUROCIL powder and sprinkle it in 95 to 96 Kg. hot water (temp. 70 °C), stir it for few minutes to make a paste. Cool it to room temperature. Thick paste is obtained after the paste is cooled to room temperature.

PRECAUTION

While making paste ensure that no powder grains remain in paste. The paste must be smooth without any grains. "SUROCIL" IN REACTIVE PRINTINGSUROCIL paste (4 %) is mixed with gum paste in 30 : 70 ratio to make final paste.i.e. take 30 Kg. SUROCIL paste (4 %) and add 70 Kg. Gum or Alginate paste. Mix well with stirrer to get uniform paste. This paste can be used for printing alongwith normal additives.

ADVANTAGES

1. Better color yield
2. Brighter prints
3. Easy washability
4. Soft & supple feel for printed cloth

"SUROCIL" IN ACID & DISPERSE DYE PRINTING

SUROCIL can also be used in acid and disperse dye printing. SUROCIL paste (5%) is mixed with normal gum paste in 20 : 80 ratio to make final paste. i.e. take 20 Kgs. SUROCIL paste (5%) and add 80 Kgs. gum paste. Mix well with stirrer to get uniform paste. This paste then can be used with normal additives for printing of Disperse and Acid dyes.

ADVANTAGES

1. Better color value
2. Brighter prints
3. Evenness of the print in blotches
4. Easy washability
5. Soft and supple feel on printed cloth

ECONOMICS

The costliest product in final print-paste is the dyestuff. By using SUROCIL in gum paste, nearly 15 to 20 % more color realization takes place and thus there is saving of costly dyestuff to that extent. Therefore, it is always economical to use SUROCIL in printing as it saves on your dyestuffs. Also, it gives better quality of prints with soft and supple feel.

IMPORTANT NOTE

Though above recipe has been standardized by making different trials in our laboratory, user should make their own changes; if required; depending upon different conditions, quality of fabric and other parameters. No liabilities can be accepted by us and users can try this system at their own risk.

AVAILABLE PACKING

It is available in 25 Kg. bags.